manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Справочное руководство, Страница: 24 / 125

Поделиться
Скачать
Intel True Scale Fabric 12000 Series Скачать руководство пользователя страница 24

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

24

Syntax

sessionTimeoutDisable

Options

None.

Sample Output

-> sessionTimeoutDisable

Disabled session idle timeout.

Notes

Disables the idle timeout for the current CLI session. This value does not persist across 

instances of the session (i.e., each time you log on, it will default back to the system 

default value).

2.5.1.31

sessionTimeoutEnable

Enable the idle timeout for the CLI session.

Syntax

sessionTimeoutEnable

Options

None.

Sample Output

-> sessionTimeoutEnable

Enabled session idle timeout.

Notes

Enables the idle timeout for the current CLI session. This value does not persist across 

instances of the session (i.e., with each log on, it defaults back to the system default 

value).

2.5.1.32

loginMsgGet

Displays the CLI login message for this device.

Syntax

loginMsgGet

Options

None.

Sample Output

-> loginMsgGet

Welcome message: Be certain to logout when you are finished using the CLI.

Содержание True Scale Fabric 12000 Series






























































































































Отзывы:

Нет отзывов