Intel SRCU31, Руководство пользователя

Страница: 85 / 182

Storage Console 85
Selecting “Sockets” allows for the remote connection of this workstation with servers using Intel
RAID Controller SRCU31s. Select TCP/IP or IPX/SPX network protocols. To access the servers
with Intel RAID Controller SRCU31s, the corresponding remote service must be loaded on the
server. Users must be assigned access rights (Name, password). See Figure 13. After selecting
“Sockets” and “TCP/IP” you may enter the IP address of the server (if you choose “SPX/IPX”
StorCon will scan the network for suitable servers which have SPX/IPX protocol). Enter user name
and password as appropriate.
Figure 13. Remote Machine
Select Controller
After the login procedure StorCon displays a list of Intel RAID Controller SRCU31s which are
installed in the server (in this example one SRCU31, see Figure 14). This list includes controller
name, the PCI Bus system (0=primary, 1=secondary, etc.) and the PCI slot number, the controller’s
features (C=Chaining, 0=RAID 0, 1=RAID 1, 4=RAID 4, 5=RAID 5, 10=RAID 10), and the
firmware level. After selecting the controller by pressing <Enter>, all further changes to these
settings within StorCon refer to this Intel RAID Controller SRCU31 and the connected devices.
Figure 14. Select Controller