14
Hardware Installation and User’s Guide
Hardware Installation
Figure 2-1. IIR Controller Component Layout
2.1.2
Installing the IIR Controller
1. Power-off the computer system.
2. Disconnect power cord(s) and remove the system cover.
3. Install the IIR controller into an available PCI slot. See
Note:
Use the appropriate bracket on the controller for your server platform.
4. Using SATA cables, connect the SATA drives to the internal SATA connectors
located on the IIR controller.
5. Replace the system cover and reconnect power cord(s).
167 mm
56 mm
Power
PCI bus speed
66MHz = on
33MHz =off
Status
DMA mode
Port-B:0 activity
Port-B:1 activity
Back View
Port-A:1 activity
Port-A:0 activity
167 mm
56 mm
Alarm
64MB ECC SDRAM
data cache
IOP mode select
jumper
(J1 )
Channel B
64-bit /
66MHz,
universally
keyed, 3.3
and 5 volt,
PCI interface
Intel
®
80303
®
I/O processor
Front View
SATA connector B:0
SATA connector B:1
SATA Connector A:0
SATA connector A:1
SATA processor B
SATA processor A
4
MB Intel® Smart 3
FlashFile™ flash memory
Activity indicator header
PCI bus speed jumper
(J4 )
Standard bracket
Low-profile bracket
Содержание SRCS14L - RAID Controller
Страница 12: ......