Intel SR1530CL - Server System - 0 MB RAM, Руководство пользователя

Страница: 88 / 188

66 Intel
®
Server System SR1530CL / SR1530HCL / SR1530HCLS
8. Re-install the screw you removed in step 5. See letter “A” in the figure.
Figure 68. Installing an Add-In Card
9. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 62 .
10. Install the server system cover. For instructions, see “Installing the Server System
Cover” on page 29 .
11. Plug all peripheral devices and the AC power cable into the server.
Removing a PCI Add-in Card
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
“Removing the Server
System Cover” on page 28 .
4. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 61 .
5. Remove the screw at the rear of the riser assembly. See letter “A” in Figure 69 .
Save this screw. You will use it later.
6. Pull the add-in card from the socket in the riser assembly. You may need to wriggle
the card from front to back to remove it, but use caution to not twist or bend the
card. See letter “B” in the figure.
7. Install a filler panel over the opening at the rear of the riser assembly. See letter “C”
in the figure.
B
C
A
AF0009 83