manualshive.com logo in svg

Intel SE440BX - Desktop Board Motherboard, Руководство по эксплуатации продукта, Страница: 41 / 66

Поделиться
Скачать
Intel SE440BX - Desktop Board Motherboard Скачать руководство пользователя страница 41

SE440BX-2 Motherboard Product Guide

41

IDE Configuration Submenus

This submenu is for configuring IDE devices, including:

• 

Primary IDE master

• 

Primary IDE slave

• 

Secondary IDE master

• 

Secondary IDE slave

Table 9.

IDE Configuration Submenus

Feature

Options

Description

Type

• 

None

• 

Auto (default)

Specifies the IDE configuration mode for IDE
devices.

Auto automatically fills in the transfer mode values.

Maximum Capacity

No options

Reports the maximum capacity for the hard disk.

Multi-Sector Transfers

• 

Disabled (default)

• 

2 Sectors

• 

4 Sectors

• 

8 Sectors

• 

16 Sectors

Specifies number of sectors per block for
transfers from the hard drive to memory.

Check the hard drive’s specifications for optimum
setting.

LBA Mode Control

• 

Disabled

• 

Enabled (default)

Enables or disables the LBA mode control.

Transfer Mode

• 

Standard (default)

• 

Fast PIO 1

• 

Fast PIO 2

• 

Fast PIO 3

• 

Fast PIO 4

• 

FPIO 3 / DMA 1

• 

FPIO 4 / DMA 2

Specifies the method for moving data to/from the
drive.

Ultra DMA

• 

Disabled (default)

• 

Mode 0

• 

Mode 1

• 

Mode 2

Specifies the Ultra DMA mode for the drive.

Содержание SE440BX - Desktop Board Motherboard



































































Отзывы:

Нет отзывов