Intel SE440BX - Desktop Board Motherboard, Руководство по эксплуатации продукта, Страница: 29 / 66

SE440BX-2 Motherboard Product Guide
29
Upgrade the Processor
See the documentation that came with the boxed Intel Pentium II processor.
How to Install Memory
You can install from 16 MB to 384 MB of memory in the motherboard DIMM sockets. The board
has DIMM sockets arranged as banks 0, 1, and 2. The motherboard supports the following
memory features:
•
168-pin DIMMs with gold-plated contacts
•
66 or 100 MHz SDRAM
•
Non-ECC (64-bit) and ECC (72-bit) memory
•
3.3 V memory only
•
Single- or double-sided DIMMs in the following sizes:
DIMM
Capacity DIMM
Organization* SDRAM
Density
SDRAM
Organization Number of
SDRAMs
16 MB 2M X 64 16 Mbit 1M X 16 8
16 MB 2M X 64 16 Mbit 2M X 8 8
16 MB 2M X 64 64 Mbit 2M X 32 2
32 MB 4M X 64 16 Mbit 2M X 8 16**
32 MB 4M X 64 64 Mbit 2M X 32 4
32 MB 4M X 64 64 Mbit 4M X 16 4
64 MB 8M X 64 64 Mbit 4M X 16 8
64 MB 8M X 64 64 Mbit 8M X 8 8
128 MB 16M X 64 64 Mbit 8M X 8 16**
* ECC DIMM organization will be X 72 and one additional component will be used on each side of DIMM.
** If number of SDRAMs is greater than nine, the DIMM will be double sided.
When adding memory, follow these guidelines:
•
You can install DIMMs in any of the three banks.
•
You can use different sizes of DIMMs in different banks.
•
The BIOS detects the size and type of installed memory.
•
For ECC operation to be available, all installed memory must be ECC and you must enable the
ECC Configuration feature in the Setup program (see Chapter 3).