manualshive.com logo in svg

Intel SE440BX - Desktop Board Motherboard, Руководство по эксплуатации продукта, Страница: 38 / 66

Поделиться
Скачать
Intel SE440BX - Desktop Board Motherboard Скачать руководство пользователя страница 38

Using the Setup Program

38

Advanced Menu

This menu is for setting advanced features that are available through the chipset.

Table 6.

Advanced Menu

Feature

Options

Description

Plug & Play O/S

• 

No (default)

• 

Yes

Specifies if a Plug and Play operating system is being
used.

No lets the BIOS configure all devices.

Yes lets the operating system configure Plug and Play
devices.  Not required with a Plug and Play operating
system.

Reset Configuration Data

• 

No (default)

• 

Yes

Clears the BIOS configuration data on the next boot.

Numlock

• 

Auto (default)

• 

On

• 

Off

Specifies the power on state of the Num Lock feature
on the numeric keypad of the keyboard.

Peripheral Configuration

No options

Configures peripheral ports and devices.  When
selected, displays the Peripheral Configuration
submenu.

IDE Configuration

No options

Specifies type of connected IDE device.

Floppy Configuration

No options

When selected, displays the Floppy Options
submenu.

DMI Events Logging

No options

Configures DMI Events Logging.  When selected,
displays the DMI Events Logging submenu.

Video Configuration

No options

Configures video features.  When selected, displays
the Video Configuration submenu.

Resource Configuration

No options

Configures memory blocks and IRQs for legacy ISA
devices.  When selected, displays the Resource
Configuration submenu.

Содержание SE440BX - Desktop Board Motherboard



































































Отзывы:

Нет отзывов