Intel SDS2, Руководство по эксплуатации продукта

Страница: 47 / 100

Upgrading 41
Removing a Processor
1. Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2. Unplug the heat sink fan.
3. Detach the heat sink clip from the processor socket. See the documentatio n that shipped with
your processor for more detail.
4. Remove the heat sink from the processor.
5. Raise the locking bar on the socket.
6. Remove the processor from the socket.
7. If you removed the processor from the secondary socket and are not replacing it, you must
install a terminator in its place.
Installing or Removing a Terminator
1. Observe the safety and ESD precautions at the beginning of this chapter and the additional
cautions given here.
2. Raise the locking bar on the socket.
3. Aligning the corner mark on the terminator with the “handle -side” of the processor socket,
insert the terminator into the socket.
4. Lower the locking bar completely.
Do these steps in reverse to remove the terminator.
Figure 25. Installing a Terminator
/
NOTE
It is not necessary to install a heat sink on the processor terminator.