Intel SDS2, Руководство по эксплуатации продукта

Страница: 26 / 100

20 Intel Server Board SDS2 Product Guide
Installing the Processor(s)
CAUTIONS
If only one processor is to be used, it must be installed in the Primary
Processor Socket (CPU1) and a Terminator must be installed in the
Secondary Processor Socket (CPU2).
If you are adding a second processor to your system, you must verify that the
second processor is identical to the first Intel Pentium
III , same voltage and
speed.
This server board has “zero-insertion-force” sockets. If processor does not
drop easily into socket holes, make sure the lever is in the full-upright
position.
1. Observe the safety and ESD precautions at the beginning of this chapter and the additional
precautions given here.
2. When installing the primary processor, lift the locking bar on the processor socket (CPU1) as
shown. If adding a second processor, lift the locking bar on the secondary processor socket
(CPU2), and repeat steps 3 through 7 after installing the primary processor.
Figure 6. Lifting the Locking Bar