Intel SDS2, Руководство по эксплуатации продукта

Страница: 38 / 100

32 Intel Server Board SDS2 Product Guide
Getting Started with Intel ® Server Management (Optional)
Intel Server Control and the hard drive Service Partition provide real-time monitoring and alerting
for your SDS2 server hardware, emergency remote management, and remote server setup. Intel
Server Control is implemented by installing it within client-server architecture.
The Service Partition provides you with the ability to remotely access a local partition on the server
and to identify and diagnose server health issues. Remote access is provided through either a
modem or network connection.
To get started with Intel Server Management, you install the Service Partition first, then the
system’s operating system, and finally Intel Server Control. The information here describes
installation on a system running a Microsoft Windows operating system.
Installing the Service Partition
Installing the Service Partition consists of three tasks:
•
Preparing the server to boot from the CD-ROM drive
•
Creating the Service Partition
•
Formatting the Service Partition
Preparing the Server to Boot from the CD-ROM Drive
1. Insert the Intel Server Board SDS2 Resource CD into the server’s CD-ROM drive.
2. Restart the server.
3. Press <F2> at the prompt to enter the BIOS setup utility during the boot cycle.
4. Select
Boot Menu .
5. In Boot Device Priority , press the <+> key to move ATAPI
†
CD-ROM device higher in
priority than the system hard drive.
6. Press the <F10> key to save the settings. After pressing this key, the system resets and boots
from the CD-ROM drive.
Creating the Service Partition
1. From the CD-ROM menu, select Utilities and press the <Enter> key.
2. Select Run Service Partition Administrator and press the <Enter> key.
3. From the list of available items, select Create Service Partition-first time .
4. Follow the instructions that appear on the screen. These instructions prompt you to reboot the
server. It will reboot from the CD-ROM.
Formatting the Service Partition
1. After the system reboot, select the Utilities menu and press the <Enter> key.
2. Select Run Service Partition Administrator and press the <Enter> key.
3. Select Format Service Partition and Install Software .
4. Remove the System Resource CD from the CD-ROM drive and exit from the menu screen.
You can now install the server’s operating system.