Intel SBXD132 - Server Compute Blade, Инструкция по установке и эксплуатации

Страница: 52 / 130

44 Intel® Server Compute Blade SBXD132 Installation and User’s Guide
Removing the Expansion Unit Cover
The following illustration shows how to remove the expansion unit cover.
Complete the following steps to remove the expansion unit cover:
1. Read the Safety information beginning on page vii and “Installation Guidelines” on
page 39 .
2. If the host blade server and expansion unit are installed in a SBCE unit, shut down the
operating system and turn off the blade server; then, remove the combined blade
server and expansion unit from the SBCE unit (see the documentation that comes with
the blade server for more information).
3. Carefully lay the combined unit down on a flat, static-protective surface, with the
cover side up.
4. Press the cover release on each side of the expansion unit and lift the cover open.
5. Lift the-cover from the expansion unit and store it for future use.
Caution: Hazardous energy is present when the blade server is connected to the power source.
Always replace the blade cover before installing the blade server.
Cover
release
Cover
Cover
release
AF000938