Intel SBXD132 - Server Compute Blade, Инструкция по установке и эксплуатации

Страница: 33 / 130

Intel® Server Compute Blade SBXD132 Installation and User’s Guide 25
The following notes describe the type of microprocessor that the server supports and other
information that you must consider when installing a microprocessor:
•
Always install microprocessors that have the same cache size and type, the same
clock speed, and identical internal and external clock frequencies (including system
bus speed).
•
Make sure that the microprocessor with the lowest feature set is the startup (bootstrap)
microprocessor, which is installed in the microprocessor 1 socket (U66).
•
For a list of microprocessors that the blade server supports, go to http://
support.intel.com/support/ .
•
Before installing a new microprocessor, download and install the most current level of
BIOS code, from http://support.intel.com/support/ .
•
The microprocessors terminate themselves; therefore, no terminator card is required if
microprocessor socket 2 is empty. However, for proper airflow, this socket must
contain a microprocessor heat-sink filler, sometimes called a microprocessor baffle.
•
The microprocessor speeds are automatically set for this server; therefore, you do not
have to set any microprocessor frequency-selection jumpers or switches.
The following illustration shows how to install the second microprocessor on the system
board for the blade server.
To install an additional microprocessor, complete the following steps:
1. Read the safety information beginning on page vii and “Installation Guidelines” on
page 15 .
2. Shut down the operating system, turn off the blade server, and remove the blade server
from the SBCE unit (see “Removing the Blade Server from the Intel
®
Blade Server
Chassis SBCE” on page 16 for instructions).
3. Carefully lay the blade server on a flat, static-protective surface.
4. Open the blade server cover (see
“Opening the Blade Server Cover” on page 17 for
instructions).
5. Remove the bezel assembly (see “Installing the Blade Server Bezel Assembly” on
page 33 for instructions).
6. Locate the microprocessor socket on the system board.
Heat sink
Microprocessor 2
Microprocessor 1
and heat sink
Microprocessor
heat sink filler