41
Replacing the battery
The lithium battery must be handled correctly to avoid possible danger. If you replace the battery,
you must adhere to the following instructions.
If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental consideration. Batteries and accumulators that
contain heavy metals must not be disposed of with normal domestic waste. They will be taken back
free of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a
proper manner.
✏
NOTE
After you replace the battery, you must reconfigure your blade server and reset the system
date and time.
Statement 2:
xx
CAUTION:
When replacing the lithium battery, use only an equivalent type battery recommended by the
manufacturer. If your system has a module containing a lithium battery, replace it only with the
same module type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
•
Throw or immerse into water
•
Heat to more than 100
°
C (212
°
F)
•
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Complete the following steps to replace the battery:
1. Read the safety information beginning on page “Safety” on page vii and “Installation
guidelines” on page 19.
2. Follow any special handling and installation instructions that came with the battery.
3. Turn off the blade server and remove it from the SBCE unit (see “Installing and removing the
blade server from the SBCE unit” on page 20 for instructions).
4. Open the blade server cover (see “Opening the blade server cover” on page 20 for instructions).
