xii
Intel Server Compute Blade SBX82 Installation and User’s Guide
Electromagnetic compatibility notices (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his/her own expense.
✏
NOTE
Class A device definition: If a Class A device is installed within the is system, then the
system is to be considered a Class A system. In this configuration, operation of this
equipment in a residential area is likely to cause harmful interference.
✏
NOTE
This product is intended to be installed with CAT5 cable, or equivalent, to minimize
electrical interference.
Electromagnetic compatibility (ECM)
USA:
FCC CFR 47 Part 2 and 15, Verified Class A Limit
Canada:
IC ICES-003 Class A Limit
Europe:
EMC Directive, 89/336/EEC
EN55022, Class A Limit, Radiated & Conducted Emissions
EN55024 ITE Specific Immunity Standard
EN61000-4-2 ESD Immunity (Level 2 Contact Discharge, Level 3 Air Discharge)
EN61000-4-3 Radiated Immunity (Level 2)
EN61000-4-4 Electrical Fast Transient (Level 2)
EN61000-4-5 AC Surge
EN61000-4-6 Conducted RF
EN61000-4-8 Power Frequency Magnetic Fields
EN61000-4-11 Voltage Dips and Interrupts
EN6100-3-3 Voltage Flicker
Japan:
VCCI Class A ITE (CISPR 22, Class A Limit)
IEC 1000-3-2 Limit for Harmonic Current Emissions
Australia/New
Zealand:
AS/NZS 3548, Class A Limit
Taiwan:
BSMI Approval
Korea:
RRL Approval
Russia:
GOST Approval
