Intel S2600CW Скачать руководство пользователя страница 78

Страница: 78 / 210

Intel® Server Board S2600CW Platform Management

Intel® Server Board S2600CW Family TPS

Revision 2.4

State

Supported

Description

Supported only on Workstation platforms. See appropriate Platform Specific Information

for more information.

Not supported.

Yes

Soft off.



The front panel buttons are not locked.



The fans are stopped.



The power-up process goes through the normal boot process.



The power, reset, front panel NMI, and ID buttons are unlocked.

5.2.3

System Initialization

During system initialization, both the BIOS and the BMC initialize the following items.

5.2.3.1

Processor Tcontrol Setting

Processors used with this chipset implement a feature called Tcontrol, which provides a

processor-specific value that can be used to adjust the fan-control behavior to achieve

optimum cooling and acoustics. The BMC reads these from the CPU through PECI Proxy

mechanism provided by Manageability Engine (ME). The BMC uses these values as part of the

fan-speed-control algorithm.

5.2.3.2

Fault Resilient Booting (FRB)

Fault resilient booting (FRB) is a set of BIOS and BMC algorithms and hardware support that

allow a multiprocessor system to boot even if the bootstrap processor (BSP) fails. Only FRB2 is

supported using watchdog timer commands.

FRB2 refers to the FRB algorithm that detects system failures during POST. The BIOS uses the

BMC watchdog timer to back up its operation during POST. The BIOS configures the watchdog

timer to indicate that the BIOS is using the timer for the FRB2 phase of the boot operation.

After the BIOS has identified and saved the BSP information, it sets the FRB2 timer use bit and

loads the watchdog timer with the new timeout interval.

If the watchdog timer expires while the watchdog use bit is set to FRB2, the BMC (if so

configured) logs a watchdog expiration event showing the FRB2 timeout in the event data

bytes. The BMC then hard resets the system, assuming the BIOS-selected reset as the

watchdog timeout action.

The BIOS is responsible for disabling the FRB2 timeout before initiating the option ROM scan

and before displaying a request for a boot password. If the processor fails and causes an FRB2

timeout, the BMC resets the system.

The BIOS gets the watchdog expiration status from the BMC. If the status shows an expired

FRB2 timer, the BIOS enters the failure in the system event log (SEL). In the OEM bytes entry in

Содержание S2600CW



















































































































































































































Результаты поиска

Содержание S2600CW

Отзывы:

Похожие инструкции для S2600CW

Бренды по названию

Популярные бренды

Intel S2600CW, Технические характеристики продукции

Результаты поиска

Содержание S2600CW

Отзывы:

Похожие инструкции для S2600CW

Бренды по названию

Популярные бренды