Intel S2600CW Скачать руководство пользователя страница 93

Страница: 93 / 210

Intel® Server Board S2600CW Family TPS

Intel® Server Board S2600CW Platform Management

Revision 2.4

OEM SDR records are used to configure which temperature sensors are associated with which

fan control domains and the algorithmic relationship between the temperature and fan speed.

Multiple OEM SDRs can reference or control the same fan control domain; and multiple OEM

SDRs can reference the same temperature sensors.

The PWM duty-cycle value for a domain is computed as a percentage using one or more

instances of a stepwise linear algorithm and a clamp algorithm. The transition from one

computed nominal fan speed (PWM value) to another is ramped over time to minimize audible

transitions. The ramp rate is configurable by means of the OEM SDR.

Multiple stepwise linear and clamp controls can be defined for each fan domain and used

simultaneously. For each domain, the BMC uses the maximum of the domain’s stepwise linear

control contributions and the sum of the domain’s clamp control contributions to compute

the domain’s PWM value, except that a stepwise linear instance can be configured to provide

the domain maximum.

Hysteresis can be specified to minimize fan speed oscillation and to smooth fan speed

transitions. If a Tcontrol SDR record does not contain a hysteresis definition, for example, an

SDR adhering to a legacy format, the BMC assumes a hysteresis value of zero.

5.3.14.5

Thermal and Acoustic Management

This feature refers to enhanced fan management to keep the system optimally cooled while

reducing the amount of noise generated by the system fans. Aggressive acoustics standards

might require a trade-off between fan speed and system performance parameters that

contribute to the cooling requirements, primarily memory bandwidth. The BIOS, BMC and

SDRs work together to provide control over how this trade-off is determined.

This capability requires the BMC to access temperature sensors on the individual memory

DIMMs. Additionally, closed-loop thermal throttling is only supported with DIMMs with

temperature sensors.

5.3.14.6

Thermal Sensor Input to Fan Speed Control

The BMC uses various IPMI sensors as an input to the fan speed control. Some of the sensors

are IPMI models of actual physical sensors whereas some are “virtual” sensors whose values

are derived from physical sensors using calculations and/or tabular information.

The following IPMI thermal sensors are used as the input to the fan speed control:



Baseboard temperature sensors



CPU DTS-Spec margin sensors



DIMM thermal margin sensors



Exit air temperature sensor



PCH Temperature sensor



Global aggregate thermal margin sensors

Содержание S2600CW



















































































































































































































Результаты поиска

Содержание S2600CW

Отзывы:

Похожие инструкции для S2600CW

Бренды по названию

Популярные бренды

Intel S2600CW, Технические характеристики продукции

Результаты поиска

Содержание S2600CW

Отзывы:

Похожие инструкции для S2600CW

Бренды по названию

Популярные бренды