Hardware Installations and Upgrades
Replacing the Front Video and USB Module
Before removing or installing the front video and USB module, please make sure following steps are
performed.
1.
Ensure the AC power cord(s) are disconnected from the system.
2.
Remove the system cover. For instructions, see
3.
Remove the power supply modules. For instructions, see
Removing the Power Supply Module(s)
.
4.
Remove the PCI riser assemblies. For instructions, see
Removing the PCI Riser Assembly
5.
Remove the air duct. For instructions, see
Removing the Front Video and USB Module
1.
Disconnect video and USB cables from server board (see letter
A
).
2.
Remove the two screws as shown (see letter
B
).
3.
Slide the module out (see letter
C
).
4.
Remove the two screws as shown, slide the front USB header out (see letter
D
).
Figure 78. Removing the front video and USB Module
Installing the Front Video and USB Module
1.
Secure the front USB header to the module with two screws as shown (see letter
A
).
2.
Insert the front video and USB module into chassis (see letter
B
).
3.
Secure the front video and USB module to chassis with two screws (see letter
C
).
4.
Install the video and USB cables to the server board as shown (see letter
D
).
Intel
®
Server System R2000LH2/LT2 Service Guide
51
