Intel R2000LT2, Руководство по обслуживанию

Страница: 14 / 83

Server System Features
Feature Description

USB 2.0 connectors - 4 on back panel + 2 on front panel
Internal I/O
connectors/headers

One Type-A USB 2.0 connector

One internal USB header

One DH-10 Serial-B port connector
Optional I/O Module
Support
The following I/O modules utilize a single proprietary on-board connector. An installed I/O module
can be supported in addition to standard on-board features and any add-in expansion cards.

Quad port 1 GbE based on Intel
®
Ethernet Controller I350

Dual port 10GBase-T Ethernet module based on Intel
®
Ethernet Controller I350 –
AXX10GBTWLIOM

Dual SFP+ port 10GbE module based on Intel
®
82500 10 GbE controller – AXX10GBNIAIOM

Single Port FDR speed InfiniBand* module with QSFP connector – AXX1FDRIBIOM
System Fans

Eleven managed system fans

One power supply fan for each installed power supply module
Riser Cards Support for two riser card slots. Each riser card slot has support for three PCIe x16 slots
Video

Integrated 2D Video Controller

16 MB DDR3 Memory
On-board storage
controllers and
options

One low-profile eUSB 2x5 pin connector to support low-profile eUSB solid state devices

Two single port SATA connectors capable of supporting up to 6 GB/sec

Two 4-port mini-SAS connectors capable of supporting up to 3 GB/sec SAS/SATA

Intel
®
RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID capabilities
Security Trusted Platform Module (Optional)
Server Management

Integrated Baseboard Management Controller, IPMI 2.0 compliant

Support for Intel
®
Server Management Software (version TBD)

Intel
®
Remote Management Module 4 support (optional)

Intel
®
Remote Management Module 4 Lite support (optional)
Power Supply Options
The system is shipped with two power supplies with support below options.

1600W (1+1) Redundant Hot-swap Capable

1600W (1+0 or 2+0) Non-Redundant
Storage Bay Options

4 " x 3.5 " SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support

8 " x 2.5 " SATA/SAS Hot Swap Hard Drive Bays
Rack Mount Kit
Options

Extended Value rack mount rail kit (AXXELVRAIL)

Premium rack mount rail kit (AXXPRAIL), will be available at post launch
CAUTION : THE MAXIMUM RECOMMENDED SERVER WEIGHT FOR THE RACK RAILS CAN
BE FOUND at http://www.intel.com/support/motherboards/server/sb/CS-033655.htm .
EXCEEDING THE MAXIMUM RECOMMENDED WEIGHT OR MISALIGNMENT OF THE
SERVER MAY RESULT IN FAILURE OF THE RACK RAILS HOLDING THE SERVER. Use of a
mechanical assist to install and align server into the rack rails is recommended.
2 Intel
®
Server System R2000LH2/LT2 Service Guide