Intel PD440FX Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 80

Intel PD440FX Скачать руководство пользователя страница 72

A

Regulatory and Integration lnforma tion

Installation Instructions

CAUTION

Follow these guidelines to meet safety and
regulatory requirements when ins

this

board assembly.

Read and adhere to all of these instructions and

the instructions supplied with the host computer
and associated modules. If the instructions for
the host computer are inconsistent with these

instructions or the instructions for associated
modules, contact the supplier’s technical support
to find out how you can ensure that your
computer meets safety and regulatory
requirements. if you do not follow these
instructions and the instructions provided by host
computer and module suppliers, you increase
safety risk and the possibility of non-compliance
with regional laws and regulations.

Ensure Electromagnetic
Compatibility (EMC)

Before computer integration, make sure that the
host chassis, power supply, and other modules
have passed EMC testing using a motherboard

with a microprocessor from the same family (or

higher) and operating at the same (or higher)
speed as the microprocessor on this
motherboard.

In the installation instructions for the host

chassis, power supply, and other modules pay
close attention to the following:

l

Certifications (see page 75)

l

External

cable shielding and filtering

l

Mounting, grounding, and bonding
requirements

l

Keying connectors when mismating of

connectors could be hazardous

If the host chassis, power supply, and other
modules have not passed applicable EMC

testing before integration, EMC testing must be
conducted on a representative sample of the

newly completed computer.

«
...
70
71
72
73
74
...
»

Содержание PD440FX

















































































Отзывы:

Нет отзывов