Intel NIOS II страница 126 Скачать руководство пользователя

Страница: 126 / 233

Table 65.

Cache Physical Byte Address Fields

Bit Fields

tag

offset

5.2.3.2.1. Instruction Cache

The instruction cache memory has the following characteristics:

•

Direct-mapped cache implementation.

•

32 bytes (8 words) per cache line.

•

The instruction master port reads an entire cache line at a time from memory, and

issues one read per clock cycle.

•

Critical word first.

•

Virtually-indexed, physically-tagged, when MMU present.

The size of the tag field depends on the size of the cache memory and the physical

address size. The size of the line field depends only on the size of the cache memory.

The offset field is always five bits (i.e., a 32-byte line). The maximum instruction byte

address size is 31 bits in systems without an MMU present. In systems with an MMU,

the maximum instruction byte address size is 32 bits and the tag field always includes

all the bits of the physical frame number (PFN).

The instruction cache is optional. However, excluding instruction cache from the

Nios II/f core requires that the core include at least one tightly-coupled instruction

memory.

5.2.3.2.2. Data Cache

•

Direct-mapped cache implementation

•

Line size of 32-bytes

•

The data master port reads an entire cache line at a time from memory, and

issues one read per clock cycle.

•

Write-back

•

Write-allocate (i.e., on a store instruction, a cache miss allocates the line for that

address)

•

Virtually-indexed, physically-tagged, when MMU present

The size of the tag field depends on the size of the cache memory and the physical

address size. The size of the line field depends only on the size of the cache memory.

The size of the offset field depends on the line size. Line sizes of 32 bytes have offset

widths of 5-bits. The maximum data byte address size is 31 bits in systems without an

MMU present. In systems with an MMU, the maximum data byte address size is 32

bits and the tag field always includes all the bits of the PFN.

The data cache is optional. If the data cache is excluded from the core, the data

master port can also be excluded.

5. Nios II Core Implementation Details

NII-PRG | 2018.04.18

Nios II Processor Reference Guide

126

Содержание NIOS II










































































































































































































































Результаты поиска

Содержание NIOS II

Отзывы:

Похожие инструкции для NIOS II

Бренды по названию

Популярные бренды

Intel NIOS II, Руководство владельца

Результаты поиска

Содержание NIOS II

Отзывы:

Похожие инструкции для NIOS II

Бренды по названию

Популярные бренды