Intel NIOS II Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 233

Intel NIOS II Скачать руководство пользователя страница 118

Related Information
ECC

on page 133

4.7.2. Interrupt Controller Interfaces

The Interrupt controller setting determines which of the following configurations is

implemented:
•

Internal interrupt controller

•

External interrupt controller (EIC) interface

The EIC interface is available only on the Nios II/f core.

Note:

When the EIC interface and shadow register sets are implemented on the Nios II core,

you must ensure that your software is built with the latest Nios II Embedded Design
Suite (EDS) version. Earlier versions have an implementation of the

eret

instruction

that is incompatible with shadow register sets.

For details about the EIC interface, refer to “Exception Processing” in the Programming

Model chapter of the Nios II Processor Reference Handbook.

Related Information
Exception Processing

on page 74

4.7.3. Shadow Register Sets

The Number of shadow register sets setting determines whether the Nios II core

implements shadow register sets. The Nios II core can be configured with up to 63

shadow register sets.

Shadow register sets are available only on the Nios II/f core.

Note:

When the EIC interface and shadow register sets are implemented on the Nios II core,

you must ensure that your software is built with the Nios II EDS version 9.0 or higher.

For details about shadow register sets, refer to “Registers” in the Programming Model

chapter of the Nios II Processor Reference Handbook.

Related Information
Registers

on page 45

4.7.4. Reset Signals

The Include cpu_resetrequest and cpu_resettaken signals reset signals setting

provides the following functionality. When on, the Nios II processor includes

processor-only reset request signals. These signals let another device individually

reset the Nios II processor without resetting the entire system. The signals are

exported to the top level of your system.

Note:

You must manually connect these signals to logic external to your Platform Designer

system.

For more information on the reset signals, refer to the Processor Architecture chapter

of the Nios II Processor Reference Handbook.

4. Instantiating the Nios II Processor

NII-PRG | 2018.04.18

Nios II Processor Reference Guide

118

«
...
116
117
118
119
120
...
»

Содержание NIOS II










































































































































































































































Отзывы:

Нет отзывов