Intel MFS5000SI - Multi-Flex Server Compute Module Скачать руководство пользователя страница 69

Страница: 69 / 112

Intel® Compute Module MFS5000SI User Guide

Product Regulatory Requirements

This product is to be evaluated and certified as Information Technology Equipment (ITE),

which may be installed in offices, schools, computer rooms, and similar commercial type

locations. The suitability of this product for other product certification categories and/or

environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm

systems, test equipment, etc.), other than an ITE application, will require further

evaluation and may require additional regulatory approvals.

Note:

The use and/or integration of telecommunication devices such as modems and/or wireless

devices have not been planned for with respect to these systems. If there is any change of

plan to use such devices, then telecommunication type certifications will require

additional planning. If NEBS compliance is required for system-level products, additional

certification planning and design will be required.

Product Safety Requirements

Electro Magnetic Compatibility (EMC) / Harmonic

Requirements

Product Ecology Requirements

Intel has a system in place to restrict the use of banned substances in accordance with

worldwide product ecology regulatory requirements. Suppliers Declarations of

Conformity to the banned substances must be obtained from all supplier, and a Material

Declaration Data Sheet (MDDS) must be produced to illustrate compliance. Due

verification of random materials is required as a screening / audit to verify suppliers

declarations.

Item

Requirement

Description

Y/N/D

Src

Product Safety

Board to be evaluated as part of system and requires
meeting with any applicable system component
safety requirements.

Item

Requirement

Description

Y/N/D

Src

Product EMC

Board to be evaluated as part of system and requires
meeting with any applicable system component EMC
requirements.

Содержание MFS5000SI - Multi-Flex Server Compute Module

















































































































Результаты поиска

Содержание MFS5000SI - Multi-Flex Server Compute Module

Отзывы:

Похожие инструкции для MFS5000SI - Multi-Flex Server Compute Module

Бренды по названию

Популярные бренды

Intel MFS5000SI - Multi-Flex Server Compute Module, Руководство пользователя

Результаты поиска

Содержание MFS5000SI - Multi-Flex Server Compute Module

Отзывы:

Похожие инструкции для MFS5000SI - Multi-Flex Server Compute Module

Бренды по названию

Популярные бренды