Intel MFS5000SI - Multi-Flex Server Compute Module Скачать руководство пользователя страница 57

Страница: 57 / 112

Intel® Compute Module MFS5000SI User Guide

Problems with Newly Installed Application Software

Check the following:

•

Make sure the system meets the minimum hardware requirements for the software.

See the software documentation.

•

Make sure the software is properly installed and configured for the system. See the

software documentation.

•

Use only an authorized copy. Unauthorized copies often do not work.

•

If you are running the software from a diskette, CD-ROM or DVD-ROM, try a

different media.

•

Make sure the correct device drivers are installed.

If the problems persist, contact the software vendor’s customer service representative.

Problems with Application Software that Previously Functioned

Properly

Check the following:

•

Uninstall and reinstall the software. Make sure all necessary files are installed.

•

If you suspect that a transient voltage spike, power outage, or brown-out might have

occurred, reload the software and try running it again. Symptoms of voltage spikes

include a flickering video display, unexpected system reboots, and the system not

responding to user commands.

Note: Random errors in data files:

If you are getting random errors in your data files, they may

be getting corrupted by voltage spikes on your power line. If you are experiencing any of

the above symptoms that might indicate voltage spikes on the power line, you may want to

install a power conditioner between the power outlet and the system power cord.

Devices are Not Recognized within the Operating System

Operating systems include a limited set of device drivers by default. Ensure that you

install all necessary drivers at the time you install the operating system.

Содержание MFS5000SI - Multi-Flex Server Compute Module

















































































































Результаты поиска

Содержание MFS5000SI - Multi-Flex Server Compute Module

Отзывы:

Похожие инструкции для MFS5000SI - Multi-Flex Server Compute Module

Бренды по названию

Популярные бренды

Intel MFS5000SI - Multi-Flex Server Compute Module, Руководство пользователя

Результаты поиска

Содержание MFS5000SI - Multi-Flex Server Compute Module

Отзывы:

Похожие инструкции для MFS5000SI - Multi-Flex Server Compute Module

Бренды по названию

Популярные бренды