Intel MB440LX, Руководство по установке системы

Страница: 155 / 232

M440LX Server System Product Guide
155
Removing DIMMs
See Figure 6-4.
1. Observe the warnings and cautions on page 3, “Safety Guidelines.”
2. Remove the left side cover and memory module as described in
Chapter 4, "Working Inside Your System."
3. Hold the module only by its edges, being careful not to touch its
components or gold edge connectors, and place it on an antistatic
surface.
4. Starting with the first DIMM-filled socket closest to the top edge of the
module, remove the DIMMs one at a time.
▲
▲
!
CAUTION
Use extreme care when removing a DIMM. Too much
pressure can damage the socket slot. Apply only enough
pressure on the plastic ejector levers to release the DIMM.
5. Gently push the plastic ejector levers out and down to eject the DIMM
from its socket (Figure 6-4).
6. Carefully lift the DIMM away from the socket and store it in an
antistatic package.
7. Repeat the above steps to remove other DIMMs.