manualshive.com logo in svg

Intel IXP2400, Руководство пользователя, Страница: 19 / 320

Поделиться
Скачать
Intel IXP2400 Скачать руководство пользователя страница 19

Development Tools User’s Manual  

19

Developer Workbench

2

2.1

Overview

The Developer Workbench is an integrated development environment for assembling, compiling, 
linking, and debugging microcode that runs on the IXP2400 and IXP2800 Network Processor 
Microengines. 

Features:

Important Workbench features include:

•

Source level debugging.

•

Debug-only project creation mode.

•

Execution history.

•

Statistics. 

•

Media Bus device and network traffic simulation for the Network Processors 

•

Command line interface to the Network Processor simulators (Transactors).

•

Customizable graphical user interface (GUI) components.

Debugging Support:

The Workbench supports debugging in four different configurations: 

•

Local simulation with no foreign model

, in which the Workbench and the Network 

Processor simulator (Transactor) both run on the same Microsoft Windows* platform. 

•

Local simulation with local foreign models

, in which the Workbench, the Transactor, and 

one or more foreign model Dynamic-Link Libraries all run on the same Windows platform. 

•

Local simulation with a remote foreign model

, in which the Workbench and the Transactor 

both run on the same Windows platform and communicate over the network with a foreign 
model running on a remote system. 

•

Hardware

, in which the Workbench runs on a Windows host and communicates over a 

network or a serial port with a subsystem containing actual Network Processors.

Getting Help:

You can get help about the Developer Workbench and the Network Processors in several ways:

•

On the 

Help

 menu, click 

Help Topics

. This opens the Developer Workbench online help tool.

•

In the 

Project Workspace

 window (see 

Figure 1

), click the 

InfoView

 tab. This give you 

access to documentation installed along with the Software Development Kit (SDK). See 

Section 2.4.3, “About InfoView

.”

•

On the Web, go to http://developer.intel.com/design/network/products/npfamily/index.htm to 
get more information about Intel products.

Содержание IXP2400

































































































































































































































































































































Отзывы:

Нет отзывов