Intel ISP4400 - Server Platform - 0 MB RAM, Руководство по эксплуатации продукта

Страница: 52 / 114

52 SRKA4/ISP4400 Server System Product Guide
Memory Retention Bar
When accessing SKA4 baseboard components, you need to remove and install the memory
retention bar.
Removing the Memory Retention Bar
1. Unscrew the captive screw located at the front of the E-Bay. The captive screw is noted by
"A" in Figure 23.
2. Lift up the bar from the side located at the front of the E-Bay.
3. Release the clip located at the rear of the chassis. The clip is noted by "C" in Figure 23.
OM09949
C
A
B
Figure 23. Memory Retention Bar
A. Captive screw
B. Memory retention bar
C. Clip at the rear of the chassis
Installing the Memory Retention Bar
1. Slip slots in the memory retention bar into the clips located towards the rear of the chassis.
2. Secure the other side of the memory retention bar with the captive screw as shown in
Figure 23.