Intel Express 8205 Скачать руководство пользователя страница 16

14

Connecting Two Branch
Offices

Two sites can use a VPN tunnel to send and receive

secure business data over the Internet. The two sites

could be two branch offices, a remote worker and a

central office, a branch office and a central office, or

your site and a business partner’s site. For more

information, see the online documentation on the

Intel

®

 Device View CD-ROM.

Connecting two branch offices with a VPN tunnel

enables both offices to share each other’s resources

securely. Using a VPN tunnel saves the cost of

dialing into a distant site; the only cost is that of

connecting to the local Internet service provider

(ISP).

In this example, the IP address on the local side is

dynamically assigned. Therefore, the Local User ID

identifies the branch office, rather than a permanent

external IP address. If the local router had a perma-

nent IP address, then you would not have to enter a

Local User ID. The IP address would identify the

branch office.

Table 3 shows the configuration parameters used in

the VPN Tunnel Wizard to create a tunnel for the

Branch Office to Branch Office example.

Note:

 The values for the parameters in Table 3 are

examples only; you must enter the values specific to

your network.

Firewalls and network address translation

If you are using firewall filters or network address

translation (NAT) on the LAN 2 port,  the VPN

Tunnel Wizard modifies your settings to enable the

tunnel.

Connection to

Internet with dynamic

IP address

Branch Office 1

Local Network Address 192.168.1.0

Branch Office 2

Remote Network Address 175.123.45.0

7073

Internet

(ISP)

Permanent

connection to Internet with

a fixed IP address

Intel 8205 Router

®

®

Intel Router

Status

LAN

WAN Link

WAN Switch

WAN Control

Test Mode

100 Mbps

Intel Router

®

®

Intel Router

Status

LAN

WAN Link

WAN Switch

WAN Control

Test Mode

100 Mbps

Fixed

IP address

175.123.45.1

xDSL/cable

modem

Figure 24. Example Branch Office to Branch Office
VPN Tunnel. 
A VPN tunnel between two remote offices.

Parameter

Setting

Remote IP Address

175.123.45.1

Local User ID

aradomsk23

Local Network Address

192.168.1.0

Local Network Mask

255.255.255.0

Remote Network Address 175.123.45.0

Remote Network Mask

255.255.255.0

Encryption Algorithm

DES

Authentication Algorithm

MD5

Re-keying Interval

1 Day

Table 3. Configuration Parameters. Settings used for
the Branch Office to Branch Office example when
configuring the VPN tunnel using the VPN Tunnel Wizard.

VPN Tunnel Example 2

A43586-001.p65

10/24/00, 10:44 AM

14

Содержание Express 8205


















Отзывы: