Intel EXPRESS 330T, Руководство пользователя

Страница: 18 / 28

16
Federal Communications Commission (FCC)
Statement
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
The user is cautioned that changes and modifications made to the
equipment without approval of the manufacturer could void the
user’s authority to operate this equipment.
Manufacturer Declaration
This certifies that the Intel® Express 330T Stackable Hub,
Intel® Express 300 Series Ethernet Module, and the Intel®
Express 300 series Fiber Module complies with the EU Directive
89/336/EEC, using the EMC standards EN55022 (Class A) and
EN50082-1. This product also meets or exceeds EN 60950
(safety) requirements. These products have been tested and
verified to meet CISPR 22 Class A requirements.
Taiwan Class A EMI Statement
Regulatory Information and Warnings
VCCI Statement
Class A ITE
This is a Class A product based on the standard of the Voluntary
Control Council for Interference by Information Technology
Equipment (VCCI). If this equipment is used in a domestic
environment, radio disturbance may arise. When such trouble
occurs, the user may be required to take corrective actions.
WARNING
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
Internal access to Intel Express Stackable Hubs is intended only for
qualified service personnel. Do not remove any covers except
Expansion Slot covers when optional modules are being installed.
WARNING
The system is designed to operate in a typical office environment.
Choose a site that is:
· Clean and free of airborne particles (other than normal room
dust).
· Well ventilated and away from sources of heat including
direct sunlight.
· Away from sources of vibration or physical shock.
· Isolated from strong electromagnetic fields produced by
electrical devices.
· In regions that are susceptible to electrical storms, we
recommend you plug your system into a surge suppressor and
disconnect telecommunication lines to your modem during an
electrical storm.
· Provided with a properly grounded wall outlet.
Do not attempt to modify or use the supplied AC power cord if it is
not the exact type required.
Ensure that the system is disconnected from its power source and
from all telecommunications links, networks, or modems lines
whenever the chassis cover is to be removed. Do not operate the
system with the cover removed.