Intel ETHEREXPRESS PRO/100, Руководство по установке

Страница: 17 / 39

13
11 To return to the console prompt, choose Exit.
NOTE: If the adapter cannot transmit or receive following the installation, you
may need to modify the frame type in the AUTOEXEC.NCF file.
Novell NetWare 3.2, Client 32 Only
Refer to the online documents in the \INFO\NETWARE directory. On a DOS
computer, view the appropriate readme file for information on installing your
network driver.
To view the readme files, insert the Intel adapter disk into a drive, switch to that
drive, type
SETUP /README
and press Enter.
DOS and Windows 3.1 Setup for Novell NetWare DOS ODI Clients
NOTE: Windows 95/98 users should refer to the previous sections on Windows
95/98. NetWare Client 32 users should refer to the NetWare readme files
in the \NETWARE directory.
DOS and Windows 3.1 Automatic Configuration
PCI computers automatically detect and configure PCI-compliant adapters when
the computer starts. The BIOS sets the adapter IRQ level and I/O memory
address automatically each time you start your computer.
Start your computer to automatically configure the adapter. Resource configura-
tion is complete when the DOS prompt appears. You can now continue with the
procedure below.
If your computer displays an error during startup, it may require additional steps
to configure a PCI adapter. See the PCI Installation Tips section later in this
guide for more information.
Run Setup to Install Network Drivers
Setup can automatically install NetWare DOS ODI client drivers for you or dis-
play a readme file with installation instructions for other Network Operating
System (NOS) drivers.
1 If your computer already has network drivers installed, restart the computer
without loading them. If the drivers are loaded from the AUTOEXEC.BAT
or CONFIG.SYS file, type
REM
in front of each line that loads a network
driver. Or, with DOS 6.x or later, press F5 as DOS starts to bypass the
drivers.
2 Insert the Intel adapter disk in a drive, switch to that drive, and at the DOS
prompt, type
SETUP
and press Enter.
3 Select the adapter from the menu.
4 From the Main menu, select Automatic Setup. Then, follow the instructions
on the screen. If you want to test the adapter with a responder on the net-
work, see the Responder Testing on the Network (Optional) section later in