Intel DQ33HS Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 82

background image

Intel Desktop Board DQ33HS Product Guide

24

LAN Wake Capabilities

CAUTION

For LAN wake capabilities, the 5 V standby line for the power supply must be capable
of delivering ad5 V standby current. Failure to provide adequate standby
current when using this feature can damage the power supply.

LAN wake capabilities enable remote wake-up of the computer through a network.
The LAN subsystem PCI bus network adapter monitors network traffic at the Media
Independent Interface.  Upon detecting a Magic Packet* frame, the LAN subsystem
asserts a wake-up signal that powers up the computer.  Depending on the LAN
implementation, the board supports LAN wake capabilities with ACPI in the following
ways:

•

The PCI Express WAKE# signal

•

The PCI bus PME# signal for PCI 2.3 compliant LAN designs

•

By Ping

•

Magic Packet

•

The onboard LAN subsystem

Instantly Available PC Technology

CAUTIONS

For Instantly Available PC technology, the 5 V standby line for the power supply must
be capable of delivering ad5 V standby current. Failure to provide adequate
standby current when using this feature can damage the power supply and/or effect
ACPI S3 sleep state functionality.

Power supplies used with this Desktop Board must be able to provide enough standby
current to support the standard Instantly Available (ACPI S3 sleep state) configuration.
If the standby current necessary to support multiple wake events from the PCI and/or
USB buses exceeds power supply capacity, the Desktop Board may lose register
settings stored in memory.

Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-to-
RAM) sleep state. While in the S3 sleep state, the computer will appear to be off. If
the computer has a dual-colored power LED on the front panel, the sleep state is
indicated by the LED turning amber. When signaled by a wake-up device or event, the
computer quickly returns to its last known awake state.

The Desktop Board supports the

PCI Bus Power Management Interface Specification

.

Add-in cards that support this specification can participate in power management and
can be used to wake the computer.

«
...
22
23
24
25
26
...
»

Содержание DQ33HS



















































































Отзывы:

Нет отзывов

Похожие инструкции для DQ33HS

Бренд: Texas Instruments Страницы: 19

Бренд: QDI Страницы: 20

Fatal1ty Z87 Killer Series

Бренд: ASROCK Страницы: 102

Бренд: Freescale Semiconductor Страницы: 4

Бренд: MSI Страницы: 30

GA-Z97X-Gaming G1

Бренд: Gigabyte Страницы: 136

Бренд: Benezan Electronics Страницы: 18

Бренд: Embedian Страницы: 70

Бренд: MSI Страницы: 58

Бренд: IMS Страницы: 14

Бренд: ASROCK Страницы: 139

KD600-H110/Q170

Бренд: DFI Страницы: 80

Бренд: DFI Страницы: 92

cPCI-6620 Series

Бренд: ADLINK Technology Страницы: 80

GA-X99-Phoenix SLI

Бренд: GIGA-BYTE TECHNOLOGY Страницы: 128

Бренд: SiTime Страницы: 8

EDM-G-WIZARD-IMX8M-PLUS

Бренд: TechNexion Страницы: 5

Бренд: LAPIS Semiconductor Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды