Blank line. Do not delete.
Blank line. Do not delete.
The following photos provide details and descriptions for the hardware interfaces/
components of the Intel
®
IoT Gateway DK100 Series.
Figure 2.
Intel
®
IoT Gateway DK100 Series - Back
1. Analog to Digital Converter inputs. 0-5V dynamic range. Use 10-pin connector
insert supplied.
Pinout is as follows: Pin 1: Channel 1, Pin 2: Channel 0, Pin 3: Channel 3, Pin 4:
Channel 2, Pin 5: +5V (25mA max), Pin 6: GND, Pin 7: Channel 5, Pin 8: Channel
4, Pin 9: Channel 7, Pin 10: Channel 6.
2. RS-232 serial console and debug port. 3.5mm stereo audio jack. Use the 3.5mm -
> DB-9 adapter supplied. The Audio Stereo Jack adapter plugs into this connector.
3. RS-485 half duplex, non-isolated serial port. Use 3-pin connector insert supplied.
The pin-out is as follows: Pin 1: Data+(B), Pin 2: GND, Pin 3: Data-(A).
4. USB Host Port - type A.
5. USB Device port - type B.
6. RJ-45 10/100 Ethernet Port 0.
7. RJ-45 10/100 Ethernet Port 1.
8. Reset button. Use a paper clip to access the button if a reset is needed.
9. 5V DC - 4A main power input. Use the power adapter supplied.
10. Wi-Fi antenna bulkhead connectors.
Introduction—Intel IoT Gateway Development Kit DK100 Series
Intel
®
IoT Gateway Development Kit DK100 Series
April 2015
Getting Started Guide
Order No.: 330307-007
11
