Installing and Replacing Desktop Board Components
23
Connecting the Processor Fan Heatsink Cable
Connect the processor fan heatsink cable to the processor fan header (see Figure 6).
OM15862
Figure 6. Connecting the Processor Fan Heatsink Cable to the Processor Fan Header
Removing a Processor
For instruction on how to remove the processor fan heatsink, refer to the Intel World Wide Web
site at:
http://support.intel.com/support/processors/pentium4/intnotes478.htm
Installing and Removing Memory
CAUTION
To be fully compliant with all applicable Intel SDRAM memory specifications, the board requires
DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the PC
Serial Presence Detect Specification at:
http://www.intel.com/technology/memory/pcsdram/spec/
✏
NOTE
Remove the card in PCI bus add-in card connector 1 before installing or upgrading memory to
avoid interference with the memory retention mechanism.
The desktop board has two DIMM sockets arranged as banks 0 and 1, as shown in Figure 7. If
installing a single DIMM, install it in bank 0.
Refer to the Main Memory heading on page 11 for memory requirements.