Intel Desktop Board D845GLVA Скачать руководство пользователя | Manualshive

Страница: 71 / 72

background image

Regulatory Compliance

71

Installation Precautions

When you install and test the desktop board, observe all warnings and cautions in the installation
instructions.

To avoid injury, be careful of:

•

Sharp pins on connectors

•

Sharp pins on printed circuit assemblies

•

Rough edges and sharp corners on the chassis

•

Hot components (like processors, voltage regulators, and heatsinks)

•

Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.

Installation Instructions

CAUTION

Follow these guidelines to meet safety and regulatory requirements when installing this board
assembly.

Read and adhere to all of these instructions and the instructions supplied with the chassis and
associated modules. If the instructions for the chassis are inconsistent with these instructions or
the instructions for associated modules, contact the supplier’s technical support to find out how
you can ensure that your computer meets safety and regulatory requirements. If you do not follow
these instructions and the instructions provided by chassis and module suppliers, you increase
safety risk and the possibility of noncompliance with regional laws and regulations.

Ensure Electromagnetic Compatibility (EMC) Compliance

Before computer integration, make sure that the power supply and other modules or peripherals, as
applicable, have passed Class B EMC testing and are marked accordingly.

In the installation instructions for the host chassis, power supply, and other modules pay close
attention to the following:

•

Product certifications or lack of certifications

•

External I/O cable shielding and filtering

•

Mounting, grounding, and bonding requirements

•

Keying connectors when mating the wrong connectors could be hazardous

If the power supply and other modules or peripherals, as applicable, are not Class B EMC
compliant before integration, then EMC testing is required on a representative sample of the newly
completed computer.

«
...
69
70
71
72
»

Содержание Desktop Board D845GLVA









































































Отзывы:

Нет отзывов

Похожие инструкции для Desktop Board D845GLVA

Бренд: NXP Semiconductors Страницы: 12

Бренд: austriamicrosystems Страницы: 8

Бренд: AOpen Страницы: 8

MT9J003I12STCVH-GEVB

Бренд: ON Semiconductor Страницы: 5

Бренд: Arbor Technology Страницы: 86

Бренд: Supermicro Страницы: 256

Бренд: JETWAY Страницы: 48

Бренд: Honda Страницы: 692

Бренд: AOpen Страницы: 8

Бренд: TYAN Страницы: 47

Spartan-7 SP701

Бренд: Xilinx Страницы: 4

Бренд: Acorp Страницы: 54

Бренд: California Eastern Laboratories Страницы: 34

Бренд: Infineon Страницы: 14

Бренд: Commell Страницы: 53

Бренд: TRIGEM Страницы: 17

Бренд: ST Страницы: 52

Бренд: M-tech Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды