Intel Desktop Board D845GLVA Скачать руководство пользователя | Manualshive

Страница: 32 / 72

background image

Intel Desktop Board D845GLVA Product Guide

32

Navigate to the D845GLVA page, click “[

view

]

Latest BIOS updates

”,

and

select

the

Intel Iflash BIOS Update utility file.

✏

NOTE

Review the instructions distributed with the update utility before attempting a BIOS update.

The Intel Iflash BIOS update utility allows you to:

•

Update the BIOS in flash memory

•

Update the language section of the BIOS

Updating the BIOS

CAUTION

The

AUTOEXEC.BAT

file provided with the update files updates the BIOS. Do not interrupt the

process or the system may not function.

1. Boot the computer with the BIOS update diskette in drive A. During system boot, the

AUTOEXEC.BAT

file provided with the update files will automatically run the BIOS update

process.

2. When the update process is complete, the monitor will display a message telling you to remove

the diskette and to reboot the system.

3. As the computer boots, check the BIOS identifier (version number) to make sure the update

was successful. If a logo appears, press

<

Esc

>

to view the POST messages.

Recovering the BIOS

It is unlikely that anything will interrupt the BIOS update, however, if an interruption occurs, the
BIOS could be damaged. The following steps explain how to recover the BIOS if an update fails.
The following procedure uses recovery mode for the Setup program. See page 27 for more
information on Setup modes.

✏

NOTE

Because of the small amount of code available in the boot block area, there is no video support.
You will not see anything on the screen during this procedure. Monitor the procedure by listening
to the speaker and looking at the diskette drive LED.

1. Turn off the computer, disconnect the computer’s power cord, and disconnect all external

peripherals.

2. Remove the computer cover and locate the configuration jumper block (J9H2) (see Figure 9).
3. Remove the jumper from all pins as shown below to set recovery mode for Setup.

3

1

4. Insert the bootable BIOS update diskette into diskette drive A.
5. Replace the computer cover, connect the power cord, turn on the computer, and allow it to

boot. The recovery process will take a few minutes.

«
...
30
31
32
33
34
...
»

Содержание Desktop Board D845GLVA









































































Отзывы:

Нет отзывов

Похожие инструкции для Desktop Board D845GLVA

BLKDP55WG - P55 LG1156 MAX-16 GB DDR3 ATX Motherboard

Бренд: Intel Страницы: 88

Бренд: Procomp Страницы: 55

Бренд: JETWAY Страницы: 48

NuMicro NuTiny-SDK-NANO100

Бренд: Nuvoton Страницы: 18

BaseTravel 401 S

Бренд: Torqeedo Страницы: 32

Linear DC2681A-A

Бренд: Analog Devices Страницы: 8

Бренд: ECS Страницы: 74

Бренд: Supero Страницы: 78

Бренд: NXP Semiconductors Страницы: 35

AnadigmApex AN231K04-DVLP3

Бренд: Anadigm Страницы: 16

Бренд: Supero Страницы: 77

Бренд: Supermicro Страницы: 147

Бренд: DFI Страницы: 46

Бренд: Supermicro Страницы: 124

FRDMDUALK3664EVB

Бренд: NXP Semiconductors Страницы: 17

Бренд: Analog Devices Страницы: 12

Бренд: Mercury Страницы: 57

Бренд: ASROCK Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды