Intel CELERON PROCESSOR E3000 - THERMAL AND MECHANICAL DESIGN Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 126

Intel CELERON PROCESSOR E3000 - THERMAL AND MECHANICAL DESIGN Скачать руководство пользователя страница 13

Processor Thermal/Mechanical Information

Thermal and Mechanical Design Guidelines

13

2

Processor Thermal/Mechanical
Information

2.1

Mechanical Requirements

2.1.1

Processor Package

The processors covered in the document are packaged in a 775-Land LGA package
that interfaces with the motherboard using a LGA775 socket. Refer to the

datasheet

for detailed mechanical specifications.

The processor connects to the motherboard through a land grid array (LGA) surface
mount socket. The socket contains 775 contacts arrayed about a cavity in the center
of the socket with solder balls for surface mounting to the motherboard. The socket is
named LGA775 socket. A description of the socket can be found in the

LGA775 Socket

Mechanical Design Guide

.

The package includes an integrated heat spreader (IHS) that is shown in Figure 2-1
for illustration only. Refer to the processor datasheet for further information. In case
of conflict, the package dimensions in the processor datasheet supersedes dimensions
provided in this document.

Figure 2-1. Package IHS Load Areas

«
...
11
12
13
14
15
...
»

Содержание CELERON PROCESSOR E3000 - THERMAL AND MECHANICAL DESIGN































































































































Отзывы:

Нет отзывов