Intel BX80562Q6600 - Core 2 Quad 2.4 GHz Processor Скачать руководство пользователя страница 39

Страница: 39 / 69

Errata

Intel

Core™2 Extreme Quad-Core Processor QX6000

Sequence and

Intel

Core™2 Quad Processor Q6000

Sequence

Specification Update

results in a debug exception being signaled on an unexpected instruction

boundary since the MOV SS/POP SS and the following instruction should be

executed atomically.

Implication:

This can result in incorrect signaling of a debug exception and possibly a

mismatched Stack Segment and Stack Pointer. If MOV SS/POP SS is not

followed by a MOV [r/e]SP, [r/e]BP, there may be a mismatched Stack

Segment and Stack Pointer on any exception. Intel has not observed this

erratum with any commercially available software, or system.

Workaround:

As recommended in the

IA32 Intel

Architecture Software Developer’s

Manual

, the use of MOV SS/POP SS in conjunction with MOV [r/e]SP, [r/e]BP

will avoid the failure since the MOV [r/e]SP, [r/e]BP will not generate a

floating point exception. Developers of debug tools should be aware of the

potential incorrect debug event signaling created by this erratum.

Status:

For the steppings affected, see the Summary Tables of Changes.

AK52.

Last Branch Records (LBR) Updates May be Incorrect after a Task

Switch

Problem:

A Task-State Segment (TSS) task switch may incorrectly set the LBR_FROM

value to the LBR_TO value.

Implication:

The LBR_FROM will have the incorrect address of the Branch Instruction.

Workaround:

None Identified.

Status:

For the steppings affected, see the Summary Tables of Changes.

AK53.

IO_SMI Indication in SMRAM State Save Area May Be Set Incorrectly

Problem:

The IO_SMI bit in SMRAM's location 7FA4H is set to "1" by the processor to

indicate a System Management Interrupt (SMI) occurred as the result of

executing an instruction that reads from an I/O port. Due to this erratum, the

IO_SMI bit may be incorrectly set by:

•

A non-I/O instruction.

•

SMI is pending while a lower priority event interrupts

•

A REP I/O read

•

An I/O read that redirects to MWAIT

•

In systems supporting Intel

Virtualization Technology a fault in the middle of an

I/O operation that causes a VM Exit

Implication:

SMM handlers may get false IO_SMI indication.

Workaround:

The SMM handler has to evaluate the saved context to determine if the SMI

was triggered by an instruction that read from an I/O port. The SMM handler

must not restart an I/O instruction if the platform has not been configured to

generate a synchronous SMI for the recorded I/O port address.

Status:

For the steppings affected, see the Summary Tables of Changes.

Содержание BX80562Q6600 - Core 2 Quad 2.4 GHz Processor






































































Результаты поиска

Содержание BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Отзывы:

Похожие инструкции для BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Бренды по названию

Популярные бренды

Intel BX80562Q6600 - Core 2 Quad 2.4 GHz Processor, Спецификация

Результаты поиска

Содержание BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Отзывы:

Похожие инструкции для BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Бренды по названию

Популярные бренды