Intel BX80562Q6600 - Core 2 Quad 2.4 GHz Processor Скачать руководство пользователя страница 29

Страница: 29 / 69

Errata

Intel

Core™2 Extreme Quad-Core Processor QX6000

Sequence and

Intel

Core™2 Quad Processor Q6000

Sequence

Specification Update

Implication:

Due to this erratum, the processor may transfer control to an unintended

address. The result of fetching code at that address is unpredictable and may

include an unexpected trap or fault, or execution of the instructions found

there.

Workaround:

If the last page of the positive canonical address space is not allocated for

code (4K page at 00007ffffffff000 or 2M page at 00007fffffe00000) then the

problem cannot occur.

Status:

For the steppings affected, see the Summary Tables of Changes.

AK23.

VMCALL to Activate Dual-monitor Treatment of SMIs and SMM

Ignores Reserved Bit settings in VM-exit Control Field

Problem:

Processors supporting Intel

Virtualization Technology can execute VMCALL

from within the Virtual Machine Monitor (VMM) to activate dual-monitor

treatment of SMIs and SMM. Due to this erratum, if reserved bits are set to

values inconsistent with VMX Capability MSRs, VMCALL may not VMFail.

Implication:

VMCALL executed to activate dual-monitor treatment of SMIs and SMM may

not VMFail due to incorrect reserved bit settings in VM-Exit control field.

Workaround:

Software should ensure that all VMCS reserved bits are set to values

consistent with VMX Capability MSRs.

Status:

For the steppings affected, see the Summary Tables of Changes.

AK24.

The PECI Controller Resets to the Idle State

Problem:

After reset, the Platform Environment Control Interface (PECI) client

controller should first identify a PECI bus idle condition and only then search

for the first rising edge. Due to this erratum, the processor PECI controller

resets into the "Idle Detected" state upon processor reset. If another PECI

device on the platform is attempting to send a message as the processor

PECI controller comes out of reset, the processor PECI controller will typically

experience a Frame Check Sequence error and move to the idle state. Rarely,

the processor PECI controller may interpret that the message was intended

for it and try to reply. In this case a message may be corrupted but this

situation will be caught and handled by the PECI error handling protocol.

Implication:

The processor PECI controller resets to an incorrect state but the error handling

capability of PECI will resolve the situation so that the processor will be able to

respond to an incoming message immediately after reset and will not disregard

an incoming message that arrives before an idle bus is formally detected.

Workaround:

No workaround is necessary due to the PECI error handling protocol.

Status:

For the steppings affected, see the Summary Tables of Changes.

Содержание BX80562Q6600 - Core 2 Quad 2.4 GHz Processor






































































Результаты поиска

Содержание BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Отзывы:

Похожие инструкции для BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Бренды по названию

Популярные бренды

Intel BX80562Q6600 - Core 2 Quad 2.4 GHz Processor, Спецификация

Результаты поиска

Содержание BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Отзывы:

Похожие инструкции для BX80562Q6600 - Core 2 Quad 2.4 GHz Processor

Бренды по названию

Популярные бренды