Intel 815TM Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 81

Intel 815TM Скачать руководство пользователя страница 15

Intel 815 Micro-ATX Mainboard

INTRODUCTION

2-1

2.

INSTALLATION

2.1

UNPACKING

The mainboard contains the following components. Please inspect the following
contents and confirm that everything is there in the package. If anything is missing or
damaged, call your supplier for instructions before proceeding.

l

This mainboard.

l

One USER‘S MANUAL.

l

One Cable set for IDE and Floppy devices.

l

One CD diskette for device driver and utility program.

l

The Virtual Drive included in the CD as a free gift. The Virtual Drive is a very
powerful tool which will allows you to make the duplication CD titles.

l

The Stop Virus anti-virus software is included in the CD as a free gift

This mainboard contains electrostatic sensitive components and it can be easily
damaged by static electricity. So please leave it sealed in the original packing until
when installing.

A grounded anti-static mat is recommended when unpacking and installation. Please
also attached an anti static wristband to your wrist and have it grounded to the same
point as the anti-static mat.

After the opening of the mainboard carton, please observe the mainboard carefully to
make sure there is no shipping and handling damage before you can start to install the
PC system.

Having finished all the procedures above, you are now ready to install the mainboard to
the chassis. Please make sure that the chassis is the ATX or Micro-ATX type so that the
mounting hole will match with this mainboard.

IMPORTANT NOTICE:

The standby voltage is always active. Whenever you are
installing any component on the mainboard.

- BE SURE TO DISCONNECT THE POWER CABLE.

«
...
13
14
15
16
17
...
»

Содержание 815TM


















































































Отзывы:

Нет отзывов