Intel 480T, Руководство пользователя

Страница: 294 / 367

292
C H A P T E R 1 6 Using Web Device Manager
Saving Changes
There are two ways to save your changes to non-volatile storage
using Web Device Manager:
• Select Save Configuration from the Configuration task button,
Switch option.
This field contains a drop-down list box that allows you to
select either the primary or secondary configuration area. After
you select the configuration area, click Submit to save the
changes.
• Click the Logout button.
If you attempt to log out without saving your changes,
Web
Device Manager
prompts you to save your changes.
If you select Yes, the changes are saved to the selected
configuration area. To change the selected configuration area,
you must go to the Configuration task button, Switch option.
Filtering Information
Some pages have a Filter button. The Filter button is used to display
a subset of information on a given page. For example, on the OSPF
configuration page, you can configure authentication based on the
VLAN, area identifier, or virtual link. Once you select a filtering
option and click the Filter button, the form that provides the
configuration options displays the available interfaces in the drop-
down menu, based on your filtering selection.
Similarly, in certain Configuration and Statistics pages, information
is shown based on a particular slot.
Do a
GET
When Configuring a VLAN
When configuring a VLAN using Web Device Manager, prior to
editing the VLAN configuration, you must first click the
get
button to ensure that subsequent edits are applied to the correct
VLAN. If you do not click the
get
button and you submit the
changes, the changes will be made to the VLAN that was previously
displayed.