Intel 480T, Руководство пользователя

Страница: 244 / 367

242
C H A P T E R 1 3 IPX
*
Routing
3 Assign each VLAN a NetID and encapsulation type, using the
following command:
config vlan <name> xnetid <netid> [enet_ii |
enet_8023 | enet_8022 | enet_snap]
Ensure that each VLAN has a unique IPX NetID and that
the encapsulation type matches the VLAN protocol.
Once you configure the IPX VLAN information, IPX forwarding
automatically begins to function. Specifically, configuring the IPX
VLAN automatically enables the IPX/RIP, IPX/SAP, and SAP
GNS services.
Verifying IPX Router Configuration
You can use the following commands to verify the IPX routing
configuration:
•
show vlan
— In addition to other information, this command
displays the IPX NetID setting and encapsulation type.
•
show ipxconfi
g — This command is analogous to the
show
ipconfig
command for the IP protocol. It displays summary
global IPX configuration information followed by per-VLAN
information. Information includes enable/disable status for IPX/
RIP, IPX/SAP, IPX route sharing, IPX service sharing, and so on.
•
show ipxroute
— This command is analogous to the
show
iproute
command for the IP protocol. It displays static and
learned routes, along with information about the VLAN that uses
the route, hop count, age of the route, and so on.
•
show ipxsap
— This command displays the enable status of
IPX/SAP for the VLAN, and its operational and administrative
status (including the GNS reply service). It also lists any
identified IPX/SAP neighbors, SAP packet statistics, and several
other timer settings.