Intek XSG-5, Руководство по обслуживанию и список запасных частей

Страница: 16 / 28

8 tabs
4 each side
stainless steel outer shroud
3 locations 10-24 screws
stainless steel
inner shroud
10-24 screws
1 each side
STEP 7)
Attach new stainless steel
outer shroud (M1608) by aligning 8 tabs with remaining slots in the upper unit's chimney assembly as shown. Slide down to lock in place. No screws are required to secure this piece in place.
STEP 8)
Insert new exhaust deflector
(M1610) on the inside of new stainless steel outer shroud as shown, spanning both chimneys. Attach using (3) 10-24 x 1/2 THPS at indicated locations.
NOTE: Stand brace is not shown in illustration
NOTE: Stand brace is not shown in illustration
NOTE: Stand brace is not shown in i
llustration
STEP 9)
Position stainless steel inner
shroud (M1609) between steamers and attach to outer shroud using (2) 10-24 x 1/2 THPS at indicated locations. Complete installation by tightening (8) 1/4-20 x 3/4 bolts (4 each unit) that secure steamers to stand.
XSG-5 Double-Stack Chimney Kit Installation
(Rev. A 1/10)
Questions? Call 1-888-994-7636
16
SM-XSG-5
All manuals and user guides at all-guides.com
all-guides.com