Intek XSG-5, Руководство по обслуживанию и список запасных частей

Страница: 15 / 28

10-24 screws
2 locations
chimney brace
3 locations
10-24 screws
Chimney Extension
relief
Part 1, M1601
Chimney Extension
8 slots
8 tabs
Part 2, M1602
side flanges
10-24 screws
2 each side
4 each side
NOTE: This is a cutaway view
STEP 4)
Attach chimney brace
(M1600) as shown, with tabs facing up, using (3) 10-24 x 1/2 THPS. Remove (2) remaining screws at indicated location for next step.
STEP 5)
Attach first piece of lower unit
chimney extension (M1601) as shown using (3) 10-24 x 1/2 THPS at indicated locations. It is critical to install this piece correctly! All flanges must be in the air space between the aluminized steel chimney and the surrounding stainless steel. Extension has relief area specifically to assist in installation.
(See detail views)
It may be necessary to move upper unit slightly to allow screw holes to line up.
NOTE: Stand brace is not shown in illustration
STEP 6)
Attach second piece of lower unit
chimney extension (M1602) by aligning 8 slots with tabs of chimney brace
AND
8 tabs
(4 each side) with slots in the upper unit's chimney assembly. The side flanges of this piece need to be on the outside of the extension piece installed in step 5. Once lined up, slide down forcefully to lock in place until screw holes line up. Use (4) 10-24 x 1/2 THPS at indicated locations to secure.
XSG-5 Double-Stack Chimney Kit Installation
(Rev. A 1/10)
Questions? Call 1-888-994-7636
15
SM-XSG-5
All manuals and user guides at all-guides.com