88
CONFIGURING A DIAL-UP CONNECTION
If your DVX 1000 has a modem installed, you must configure it to accept dial-up
connections and then configure the connection from the client computer. The
following sections describe these procedures.
CONFIGURING THE DVX 1000 SERVER FOR INCOMING CONNECTIONS
To configure the DVX 1000 server to accept incoming connections, complete
the following steps on the DVX 1000 system:
1.
Exit MasterControl .
2.
From the Start menu, select Settings, Network and Dial-Up Connec-
tions, and then Make New Connection.
3.
If prompted, enter your location information and confirm it.
4.
When the Network Connection Wizard starts, click Next.
5.
Select Accept Incoming Connections and click Next.
6.
In the Connection Devices list , select the checkbox for the modem and
click Next.
7.
Select Do Not Allow Virtual Private Connections and click Next.
Содержание Dvx 1000
Страница 2: ......
