Integral Circuits CC 50 A, Руководство пользователя

Страница: 26 / 32

26
Installing the speed sensor
3 pin futaba servo connector
Sense
Ground
The CC50A needs a pulse signal to ground on
its speed input connection to measure speed.
A simple reed switch and one single magnet on
one of the wheels of the locomotive is sufficient
for this.
Magnet
Sensor
Locomotive Wheel
FWD>
5.4
The Handset will show the speed in the same
position as you normally see the throttle or brake
pressure.
The speed is shown in decimal as real miles per
hour.
Like in the the example on the left where it shows
the locomotive traveling at 5.4 miles per hour.
Integral circuits brake controllers come with a ready made control cable or an
attached cable, depending on the model.
For this to work right, you need to set the ac -
cording wheel diameter of your locomotive in the
Setup menu (page 17)
!