Integra DTR-8.9, Инструкция по эксплуатации

Страница: 138 / 162

138
Net/USB (DTR-9.9 only)
—Continued
Once you’ve added a station to the list, simply select it
on the Internet Radio screen, and then press [Enter] to
start playback.
Notes:
• When you try the connection after the user preset, if
“[?]” is displayed in the list, URL may be entered
incorrectly. Check the URL again.
• Even if the entered URL is improper (not the applica-
ble playlist format), some contents may be displayed.
In that case, [?] is displayed.
• When connected to an Internet radio station that uses
the MP3 streaming format, the MP3 indicator lights
up. When connected to an Internet radio station that
uses the WMA streaming format, the WMA indicator
lights up.
• If you’re using a narrowband Internet connection (e.g.,
56K modem or ISDN), depending on the station,
Internet radio may not work satisfactorily. For best
results, use a broadband connection (e.g., cable
modem, xDSL modem, etc).
Note:
When modifying network settings, after modifying it is
necessary to execute
Save Settings.
This section explains how to configure the AV receiver’s
network settings manually.
If your router’s DHCP server is enabled, you don’t need
to change any of these settings, as the AV receiver is set
use DHCP to configure itself automatically by default
(i.e., DHCP is set to Enable). If, however, your router’s
DHCP server is disabled, for example, you’re using
static IP addresses, you’ll need to configure these set-
tings yourself, in which case, a knowledge of Ethernet
networking is essential.
What’s DHCP?
DHCP (Dynamic Host Configuration Protocol) is used
by routers, computers, the AV receiver, and other devices
to automatically configure themselves on a network.
What’s DNS?
The DNS (Domain Name System) translates domain
names into IP addresses. For example, when you enter a
domain name such as
www.onkyousa.com in your Web
browser, before accessing the site, your browser uses
DNS to translate this into an IP address, in this case
63.148.251.142.
Using your computer to add a
station
On your computer, start your
Web browser and enter the AV
receiver’s IP address in the
browser’s Internet address (URL)
field.
The browser connects to the AV
receiver and displays the same screen
as the AV receiver.
Select the Internet radio station
with your browser.
Notes:
• The AV receiver’s IP address is
shown on the “Network” screen (see
page 138).
• If you’re using DHCP, your router
may not always allocate the same IP
address to the AV receiver, so if you
find that you can’t connect to the AV
receiver, recheck the AV receiver’s
IP address on “Network” screen.
Network Settings
1 Press the [RECEIVER] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ q ]/[ w ] but-
tons to select “7. Hardware
Setup”, and then press [Enter].
The “Hardware Setup” menu appears.
Receiver
Setu
p
Enter
Enter
7. Hardware Setup
1. Remote Control
2. Zone2/Zone3
3. Tuner
4. Analog
Multich
5. HDMI
6. Network
MOVE ENTER RETURN ENTER RETURN EXIT SETUP