122
Advanced Setup
—Continued
Resolution
You can specify the output resolution for the HDMI out-
puts and have the AV receiver upconvert the picture res-
olution as necessary to match the resolution supported
by your TV.
Available only when Source has been selected under the
“1-1. Monitor Out” setting.
Brightness
With this setting you can adjust the picture brightness.
Can be adjusted from –50 to +50 in steps of 1 (default is
0).
“–50” is the darkest.
“+50” is the brightest.
Contrast
With this setting you can adjust Contrast.
Can be adjusted from –50 to +50 in steps of 1 (default is
0).
“–50” is the least.
“+50” is the greatest.
Hue
With this setting you can adjust the red/green balance.
Can be adjusted from –20 to +20 in steps of 1 (default is
0).
“–20” is the strongest green.
“+20” is the strongest red.
Saturation
With this setting you can adjust saturation.
Can be adjusted from –50 to +50 in steps of 1 (default is
0).
“–50” is the weakest color.
“+50” is the strongest color.
Picture Mode
DVD-Video disc content originates from either film
(recorded at 24 frames per second) or video intended for
TV (recorded at 30 frames per second). With the default
Picture Mode setting of Auto, the AV receiver automati-
cally detects the type of content and processes it accord-
ingly to achieve the best picture quality. If the AV
receiver detects the type of content incorrectly due to
characteristics of the disc, you can select Video or Film
manually.
Auto:
The type of content is detected automati-
cally and processed accordingly (default).
Video:
Select when playing a DVD-Video disc
whose content originates from video.
Film:
Select when playing a DVD-Video disc
whose content originates from film.
Edge Enhancement
With Edge Enhancement, you can make the picture
appear sharper.
Off:
Edge enhancement off (default).
Low:
Low edge enhancement.
Medium:
Medium edge enhancement.
High:
High edge enhancement.
Mosquito NR
With Mosquito Noise Reduction, you can remove the
shimmering or haziness that sometimes appears around
objects in the picture. Mosquito noise can be an issue
with overly compressed MPEG content.
Off:
Mosquito noise reduction off (default).
Low:
Low mosquito noise reduction.
Medium:
Medium mosquito noise reduction.
High:
High mosquito noise reduction.
Random NR
With Random Noise Reduction, you can remove indis-
criminate picture noise, such as film grain.
Off:
Random noise reduction off (default).
Low:
Low random noise reduction.
Medium:
Medium random noise reduction.
High:
High random noise reduction.
Block NR
With Block Noise Reduction, you can remove the block
distortion that sometimes appears in the picture. Block
noise can be an issue with overly compressed MPEG
content.
Off:
Block noise reduction off (default).
On:
Block noise reduction on.
Gamma
Adjust the balance of incoming picture R (red), G
(green), and B (blue) color data signal to the output color
data signal.
Can be adjusted from –3 to +3 in steps of 1 (default is 0).
Through:
Select this to pass video through the AV
receiver at the same resolution and with no
conversion (default).
Auto:
Select this to have the AV receiver automat-
ically convert video at resolutions not sup-
ported by your TV.
When the “Monitor Out” is set to “Analog”,
it will operate as “Through”.
480p (480/576p):
Select this for 480p or 576p output and
video conversion as necessary.
720p:
Select this for 720p output and video con-
version as necessary.
1080i:
Select this for 1080i output and video con-
version as necessary.
1080p:
Select this for 1080p output and video con-
version as necessary.
When the “Monitor Out” is set to “Analog”,
it will operate as “1080i”.
Содержание DTR-8.9
Страница 1: ...DTR 8 9 Instruction Manual AV Receiver DTR 9 9...
Страница 161: ...161 Memo...
