Integra DTR-70.4, Инструкция по эксплуатации

Страница: 62 / 120

Advanced Operations
En-62
Composite Video Input
If you connect a component to a composite video input,
you must assign that input to an input selector.
If you switch the input to “
TV/CD ” with its default
assignment, the audio of “ TV/CD ” is output while the
video of the previously-selected source is displayed.
Here are the default assignments.
■
BD/DVD , CBL/SAT , STB/DVR, GAME1 , GAME2 ,
TV/CD , PHONO
`
IN1 , IN2 , IN3 , IN4 :
Select the input to which the component has been
connected.
`
- - - - - :
The composite video is not input.
Note
• “ AUX ” is used only for input from the front panel.
• “ PC ” is used only for input from
PC IN
.
• Using these inputs as audio-exclusive allows you to enjoy audio
and video from separate inputs. Refer to “Playing Audio and
Video from Separate Sources” for details (
➔
page 37 ).
Digital Audio Input
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the
OPTICAL IN 1
, you
must assign “ OPTICAL1 ” to the “ TV/CD ” input selector.
Here are the default assignments.
■
BD/DVD , CBL/SAT , STB/DVR, GAME1, GAME2 ,
PC , TV/CD , PHONO
`
COAXIAL1 , COAXIAL2 , COAXIAL3 ,
OPTICAL1 , OPTICAL2 :
Select the input to which the component has been
connected.
`
- - - - - :
Select if the component is connected to an analog
audio input.
Note
• When an
HDMI IN
is assigned to an input selector in
“ HDMI Input ” (
➔
page 60
), the same
HDMI IN
will be set as
a priority in this assignment. In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “
Audio Selector ” (
➔
page 76
).
• Supported sampling rates for PCM signals (stereo/mono) from a
digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16,
20, 24 bit.
• “ AUX ” is used only for input from the front panel.
Main Menu Speaker Setup
Here you can check the settings made by
Audyssey MultEQ XT32 Room Correction and Speaker
Setup function, or set them manually, which is useful if
you change one of the connected speakers after using
Audyssey MultEQ XT32 Room Correction and Speaker
Setup function.
Note
• These settings are not available in either of the following cases:
– a pair of headphones is connected.
– the “
Audio TV Out ” setting is set to “ On ” (
➔
page 81 ).
– “ HDMI Control(RIHD) ” is set to “ On ” (
➔
page 80
) and
you’re listening through your TV speakers.
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
STB/DVR IN3
GAME1 IN4
GAME2 - - - - -
PC PC IN (Fixed)
AUX FRONT (Fixed)
TV/CD - - - - -
PHONO - - - - -
Input selector Default assignment
BD/DVD COAXIAL1
CBL/SAT COAXIAL2
STB/DVR COAXIAL3
GAME1 OPTICAL1
GAME2 - - - - -
PC - - - - -
AUX FRONT (Fixed)
TV/CD OPTICAL2
PHONO - - - - -
Speaker Setup
Some of the settings in this section are set automatically
by Audyssey MultEQ
® XT32 Room Correction and
Speaker Setup function (
➔
page 38
).
1 2 3 4 5
“ Setup ”