En-3
1
2
3
4
5
6
7
8
9
F G
H
I
J
L
M
N
O
P
Q
K
(Australian models)
Front Panel
1
z
On/Standby button
: Turns the unit on or into standby
mode.
2
Dolby Atmos indicator
: Lights when playing Dolby
Atmos.
3
Tone and Tone Level buttons
: Adjust the high tone
and low tone.
4
Remote control sensor
: Receives signals from the
remote controller.
5
Display
6
Listening Mode buttons
: Allow you to select the
listening mode.
7
Dimmer button (North American models)
: Switches
the brightness of the display.
RT/PTY/TP button (Australian models)
: Can be used
when receiving the station transmitting text information.
8
Memory button
: Registers or deletes a station.
9
Tuning Mode button
: Switches the tuning mode.
F
Display button
: Switches the information on the
display.
G
Setup button
: Used when making settings.
H
Cursor buttons, Tuning
jl
button, Preset
d c
button and Enter button
: Move the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune in to the station with Tuning
jl
or
select the registered station with Preset
d c
.
I
Return button
: Returns the display to the previous
state.
J
Master Volume
: Allows you to adjust the volume.
K
Zone 2 button and Off button
: Controls the multi-zone
function.
L
Zone 2 Level
/
button
: Allows you to adjust the
speaker volume of a separate room.
M
Phones jack
: Stereo headphones with a standard plug
are connected.
N
Hybrid Standby indicator
: Lights if the unit enters
standby mode when the HDMI Standby Through, USB
Power Out at Standby, Network Standby or Wakeup
from Bluetooth function is enabled.
O
Input selector buttons
: Switch the input to be played.
P
AUX Input Audio/Video jack
: A video camera or such
other device is connected.
Q
Setup Mic jack
: The supplied speaker setup
microphone is connected.
DTR-20.7_BAS_En_SN29401992_150417.indd 3
2015/05/14 16:41:15