30
> Before Start
> Part Names
> Install
> Initial Setup
> Playback
Supplementary information | Advanced Setup | Others
AUDIO Menu
By pressing Audio on the remote controller
during play, you can adjust frequently used
settings, such as the sound quality.
1. Press Audio (c) on the remote controller.
2. Select the item with the Up/Down
buttons (a) on the remote controller.
3. Select the setting value with the Left/
Right buttons (a) on the remote
controller.
0
To return to the previous display, press
Return (b).
∫
Direct
Enable or disable the Direct feature which
outputs pure sound as it was intended by
bypassing the tone control circuits during
play.
∫
Bass
Enhance or moderate the bass range of the
speakers.
Select between
j
10 dB and
i
10 dB in 1
dB increments. (default value: 0 dB)
0
It cannot be set if the Direct mode is
selected.
∫
Treble
Enhance or moderate the treble range of
the speakers.
Select between
j
10 dB and
i
10 dB in 1
dB increments. (default value: 0 dB)
0
It cannot be set if the Direct mode is
selected.
∫
Balance
Adjust the balance of the sounds output
from the left and right speakers.
Select between L
i
10 and R
i
10 in 1 steps
increments. (default value: 0)
a
c
b
SN29403237_DTM-6_En_1707XX.book 30 ページ ２０１７年７月２７日 木曜日 午後１時３９分
