15
|
Supplementary Information, etc.
Setting Item
Default Value
Setting Details
Height 2 Right
9' 0" / 2.70 m
Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Right
7' 0" / 2.10 m
Specify the distance between each speaker and
the listening position.
Surr Back Right
7' 0" / 2.10 m
Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surr Back Left
7' 0" / 2.10 m
Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Left
7' 0" / 2.10 m
Specify the distance between each speaker and
the listening position.
Subwoofer 1
12' 0" / 3.60 m
Specify the distance between each speaker and
the listening position.
Subwoofer 2
12' 0" / 3.60 m
Specify the distance between each speaker and
the listening position.
•
Default values vary depending on the regions.
•
Distance units can be switched by pressing Mode on the remote controller. When the unit is set as
feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters,
you can set between 0.01 m and 9.00 m in increments of 0.01 m.
■
4. Level Calibration
Setting Item
Default Value
Setting Details
Front Left
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Center
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Front Right
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Height 1 Left
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 1 Right
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Left
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Right
0.0 dB
Select a value between "
−
12.0 dB" and "
＋
12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
